Alarm N6 Series Manual do Utilizador descarregar pdf (Página 21)

Figure 2-6

2.4 Manual Record

Note:

Please make sure you have the record operation right and you have properly installed the

formatted HDD.

You can right click mouse or in the main menu, from Advanced->Manual Record to go to record

interface.

There are three statuses: schedule/manual/stop. Highlight icon“○” to select corresponding

channel. See Figure 2-7.

 Manual: The highest priority. After manual setup, all selected channels will begin ordinary

recording.

 Schedule: Channel records as you have set in recording setup (Main Menu->Setting-

>Schedule)

 Stop: All channels stop recording.

Figure 2-7

2.5 Encode

Encode interface is shown as in Figure 2-8.

 Channel: Select the channel you want.

 Type: Please select from the dropdown list. There are three options: regular/motion

detect/alarm. You can set the various encode parameters for different record types.

 Compression: System supports H.264.

 Resolution: System supports various resolutions, you can select from the dropdown list. The

main stream supports D1/HD1/2CIF/CIF/QCIF.The extra stream supports CIF/QCIF. Please

note the frame rate may vary due to different channels.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Sem comentários

Alarm N6 Series Manual do Utilizador Página 21